
Huawei MA5680T Description
Product Introduction
The MA5680T is the largest processing capacity OLT in Huawei's MA5600T series OLT. It is available in two sizes: 19 inches and 21 inches. Please contact our sales team for more information on which size is suitable for your network.
The MA5608T/MA5683T/MA5680T is a series of integrated fiber-copper access devices. They support ADSL2+, VDSL2, Vectoring, SuperVector, SHDSL, POTS, GPON, 10G GPON, and P2P access modes and provide Internet access, voice, and video services to subscribers. As a series of large-/medium-/small-capacity devices, they share the same software platform and service boards.
- Large-capacity device MA5680T
- Medium-capacity device MA5683T
- Small-capacity device MA5608T
Specifications of the ETSI service subrack
Item | Specification |
Dimensions (W x D x H, including mounting ears) | 530.00 mm x 275.80 mm x 447.20 mm |
Dimensions (W x D x H, excluding mounting ears) | 490.00 mm x 275.80 mm x 447.20 mm |
Maximum weight at full configuration (including mounting ears) | 33.00 kg |
Specifications of the IEC service subrack
Item | Specification |
Dimensions (W x D x H, including mounting ears) | 482.60 mm × 275.80 mm × 441.70 mm |
Dimensions (W x D x H, excluding mounting ears) | 442.00 mm × 275.80 mm × 441.70 mm |
Maximum weight at full configuration (including mounting ears) | 30.54 kg |
Technical Datasheet
Item | MA5600T (ETSI) | MA5600T (IEC) |
Supported cabinet | Indoor cabinet: N63E-22, N66E-18 | Indoor cabinet: N66E-22 |
Outdoor cabinet: F01T500, F01D2000 | Outdoor cabinet: none | |
Board configuration | 2 slots for control boards | 2 slots for control boards |
16 slots for service boards | 14 slots for service boards | |
1 slot for the universal interface board | 1 slot for the universal interface board | |
2 slots for upstream interface boards | 2 slots for upstream interface boards | |
2 slots for power interface boards. | 2 slots for power interface boards. | |
Supported control board and its switching capacity | SCUB: 48 Gbit/s | |
SCUF: 128 Gbit/s | ||
SCUN/SCUK: 480 Gbit/s in active/standby mode or 960 Gbit/s in load-sharing mode | ||
SCUH/SCUV: 960 Gbit/s in active/standby mode or 1920 Gbit/s in load-sharing mode | ||
System Layer 2 packet forwarding rate | SCUB: 72 Mpps | |
SCUF: 190 Mpps | ||
SCUN/SCUK: 726 Mpps in active/standby mode or 1452 Mpps in load-sharing mode | ||
SCUH/SCUV: 1428 Mpps in active/standby mode or 2856 Mpps in load-sharing mode | ||
Switching/Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20s. | |
BER in full load | BER of a port when the port transmits data in full load < 10 e-7 | |
System reliability specifications | System: redundant configuration. | |
System availability for the typical configuration: > 99.999% | ||
Mean time between failures (MTBF): about 45 years. | ||
NOTE: | ||
Due to different network environments and different boards used by devices, the preceding MTBF (45 years) of the MA5600T/MA5603T/MA5608T is only for reference. The average repair time for field replaceable units (FRUs) is about 2 hours. The preceding values are only for reference. For details, contact the related Huawei engineers. | ||
Maximum number of ADSL2+ ports in a subrack | 1024 | 896 |
Maximum number of VDSL2 ports in a subrack | 1024 | 896 |
Maximum number of Vectoring ports in a subrack | 768 | 768 |
Maximum number of SuperVector ports in a subrack | N/A | N/A |
Maximum number of EFM SHDSL ports in a subrack | 512 | 448 |
Maximum number of TDM SHDSL ports in a subrack | 256 | 224 |
Maximum number of POTS ports in a subrack | 1024 | 896 |
Maximum number of ISDN BRA ports in a subrack | 512 | 448 |
Maximum number of ISDN PRA ports in a subrack | 64 | 64 |
Maximum number of GPON ports in a subrack | 256 | 224 |
Maximum number of 10G GPON ports in a subrack | 128 | 112 |
Maximum number of P2P FE ports in a subrack | 768 | 672 |
Maximum number of P2P GE ports in a subrack | 768 | 672 |
Maximum number of upstream ports (GE ports in the GIU slot) in a subrack | 8 | 8 |
Maximum number of upstream ports (10GE ports in the GIU slot) in a subrack | 4 | 4 |
Maximum number of upstream ports (PON ports in the GIU slot) in a subrack | 1 | 1 |
Maximum number of upstream ports (ports on the control board) in a subrack | SCUB/SCUF: 4 x GE (in the active/standby mode) | |
SCUN/SCUK: 8 x GE (in the load-sharing mode) | ||
SCUH/SCUV: 8 x 10GE/GE (in the load-sharing mode) | ||
Maximum number of extended subracks connected to a master subrack | 32 | 32 |
Maximum number of ONUs supported by each subrack | For Layer 2 applications, the maximum number of ONUs supported by each subrack is determined based on the number of MAC addresses and service flows supported by the control board, as well as the number of MAC addresses and service flows planned for the ONUs. | |
For Layer 3 applications, the maximum number of ONUs supported by each subrack is determined based on the number of routes and ARP entries supported by the control board. |
Huawei MA5680T Board Supported
Control Board (SCU):
Board | Access Service | Panel ports | Channel to the service board |
H801SCUB/H802SCUB | Copper | 4 GE ports | 16 GE channels |
H801SCUF | Optical and copper | 4 GE ports | 16 GE channels |
H801SCUL | Optical | None | 16 GE/10GE channels |
H801SCUN | Optical and copper | 4 GE ports | 16 GE/10GE channels |
H802SCUN | Optical and copper | 4 GE ports | 16 GE/10GE channels |
H801SCUK | Optical and copper | 4 GE ports | 16 GE/10GE channels |
H801SCUH | Optical and copper | 4 GE/10GE ports, Supporting automatic switching for remote software commissioning using GE upstream transmission. | 16 10GE/20GE channels |
H801SCUV | Optical | 4 GE/10GE ports, Supporting automatic switching for remote software commissioning using GE upstream transmission. | 16 10GE/20GE channels |
Upstream Interface Boards
Board | Upstream Transmission (*) | Cascading (*) | Intra-board aggregation and Inter-board aggregation | Clock Feature | Port | Pluggable Optical Module | Pluggable Electrical Module |
H801GICD | Yes | Yes | Yes | 1588ACR (with CKMD) | Four GE ports | SFP | SFP |
H801GICE | Yes | Yes | Yes | 1588ACR (with CKMD) | Four GE electrical ports | No | No |
H801GICF | Yes | Yes | Yes | 1588ACR (with CKMD) | Two GE ports | SFP | SFP |
H801GICG | Yes | Yes | Yes | 1588ACR (with CKMD) | Two GE electrical ports | No | No |
H801GICK | Yes | Yes | Yes | GE synchronous Ethernet (V800R013C10 and later versions) | Two GE ports | SFP | SFP |
1588v2 (with CKMC or CKMD, V800R013C10 and later versions) | |||||||
1588ACR (with CKMD, V800R013C10 and later versions) | |||||||
H802GICK | Yes | Yes | Yes | GE synchronous Ethernet (V800R017C10 and later versions) | Two GE ports | SFP | SFP |
1588v2 (with CKMC or CKMD, V800R017C10 and later versions) | |||||||
1588ACR (with CKMD, V800R017C10 and later versions) | |||||||
H801GSCA | Yes | Yes | Yes | GE synchronous Ethernet | Four GE ports | SFP | No |
1588ACR (with CKMD) | |||||||
H801X1CA | Yes | Yes | Yes | 1588ACR (with CKMD) | One 10GE port | XFP | No |
H801X2CA | Yes | Yes | Yes | 1588ACR (with CKMD) | Two 10GE ports | XFP | No |
H801X2CS | Yes | Yes | Yes | 10GE synchronous Ethernet | Two 10GE ports | SFP+ | No |
1588ACR (with CKMD) | |||||||
H802X2CS | Yes | Yes | Yes | 10GE/GE synchronous Ethernet | Two 10GE/GE ports | SFP/SFP+ | SFP |
1588ACR (with CKMD) | |||||||
H801X2CK | Yes | Yes | Yes | 10GE/GE synchronous Ethernet (V800R017C10 and later versions) | Two 10GE/GE ports | SFP/SFP+ | SFP |
1588v2 (with CKMC or CKMD, V800R017C10 and later versions) | |||||||
1588ACR (with CKMD, V800R017C10 and later versions) | |||||||
H803X2CK | Yes | Yes | Yes | 10GE/GE synchronous Ethernet | Two 10GE/GE ports | SFP/SFP+ | SFP |
1588v2 (with CKMC or CKMD) | |||||||
1588ACR (with CKMD) | |||||||
H802P2CA | Yes | No | No | No | Two GPON port (only TX0/RX0 available) | SFP | No |
Power Board
Board | Alarm Monitoring | E-label | Indicator |
H801PRTE | Yes | Yes | ALARM |
H801PRTG | No | No | No |
H801PRTA | Yes | Yes | PWR48 (power status indicator) and FUSE_48 (fuse status indicator) |
Gpon Service Boards
Specification | H801GPBC | H802GPBD | H805GPBD | H802GPFD/H805GPFD/H806GPFD | H806GPBH/H807GPBH | H801GPMD |
Port quantity | 4 | 8 | 8 | 16 | 8 | 8 |
MAX Split ratio (Class B+) | 0.086111111 | 0.086111111 | 0.086111111 | 0.086111111 | 0.086111111 | 0.086111111 |
MAX Split ratio (Class C+/Class C++) | No | 0.130555556 | 0.130555556 | 0.130555556 | 0.130555556 | 0.130555556 |
ONU-based shaping | No | No | Yes | Yes | Yes | Yes |
Optical performance monitor | Yes (querying Rx optical power is not supported) | Yes | Yes | Yes | Yes | Yes |
Controlled optical signal transmission of the optical module | No | Yes | Yes | Yes | Yes | Yes |
ONU-based rate limitation | No | Yes | Yes | Yes | Yes | Yes |
CAR group | No | Yes | Yes | Yes | Yes | Yes |
Temperature query and high temperature alarm | Yes | Yes | Yes | Yes | Yes | Yes |
Automatic power shutdown in case of a high temperature | No | Yes | Yes | Yes | Yes | Yes |
Maximum differential fiber distance (km) | 20 | 20 | 20 | 40 | 40 | 40 |
Maximum Number of Service Flows Supported by the Board | 8184 | 8184 | 8184 | 16368 | 8184 | 6144 |
Maximum Number of MAC address Supported by the Board | 4096 | 8192 | 8192 | 32768 | 16384 | 16384 |
Available DBA bandwidth (based on single port) (kbit/s) | 1238400 | 1238784 | 1238784 | 1238784 | 1238784 | 1238784 |
Number of T-CONT supported by each GPON port | 256 | 1024 | 1024 | 1024 | 1024 | 1024 |
Board supporting downstream FEC | Yes | Yes | Yes | Yes | Yes | Yes |
Board supporting upstream FEC | No | Yes | Yes | Yes | Yes | Yes |
Rogue ONT detection | No | Yes | Yes | Yes | Yes | Yes |
Number of ONUs supported by a GPON port | 64 | 128 | 128 | 128 | 128 | 128 |
Number of GEM ports supported by each board | 8192 | 8192 | 8192 | 16384 | 8192 | 8192 |
Number of GEM ports supported by each GPON port | 3872 | 3872 | 3872 | 3872 | 3872 | 3872 |
Number of service ports supported by each GEM port | 8 | 8 | 8184 | 8184 | 8184 | 7168 |
HQoS (four levels) | No | No | No | H802GPFD: No | H806GPBH: No | No |
H805GPFD/H806GPFD: Yes | H807GPBH: Yes | |||||
9216-byte Jumbo frames | No | No | No | H802GPFD: No | H806GPBH: No | No |
H805GPFD/H806GPFD: Yes | H807GPBH: Yes | |||||
1588v2 | No | No | Yes | Yes | Yes | No |
Power budget supported by a GPON port | Class B+ (28 dB, mostly used) | Class B+ (28 dB, mostly used) | ||||
Class C+ (32 dB long reach transmission) | ||||||
Class C++: 35 dB | ||||||
Minimum bandwidth supported by a T-CONT | 512kbps | 1 Mbit/s (in the minimum delay mode) | ||||
128 kbit/s (in the maximum bandwidth usage mode) |
Return and Exchange Policy
Thank you for choosing Huatelecom! We value your trust and strive to provide high-quality products and exceptional service. Below is our comprehensive return and exchange policy to ensure your rights are protected.
1. Return Policy
-
Eligibility for Returns (Quality Issues Only):
If the product has quality defects that affect its normal usage, you are eligible to apply for a return within 7 calendar days of receiving the product. The following conditions must be met:- The product must be unused, with all original packaging, accessories, and manuals intact.
- A valid proof of purchase (order number, invoice, etc.) must be provided.
- Clear evidence of the defect, such as photos or videos, must be submitted for verification.
-
Shipping Costs for Returns:
If the return is due to quality issues, Huatelecom will cover the international shipping costs for returning the product. -
Refund Processing:
Once the returned product is received and inspected, the refund will be processed within 7 business days. The refund will be issued through the original payment method, and processing times may vary depending on your payment provider.
2. Exchange Policy
-
Eligibility for Exchanges (Quality Issues Only):
You may request an exchange if the product develops a quality issue within 15 calendar days of receipt. The conditions for eligibility are:- The product must be returned with all original packaging, accessories, and manuals.
- Proof of purchase and evidence of the defect must be provided.
-
Shipping Costs for Exchanges:
Huatelecom will bear the international shipping costs for the exchange. -
Exchange Process:
Upon receiving the defective product, we will inspect it and send a replacement product within 7 business days.
3. Warranty Service
-
Coverage During the Warranty Period:
For products within the warranty period, if quality issues arise, we will provide a replacement free of charge with your next order. No additional shipping costs will be incurred for the replacement. -
Out-of-Warranty Repairs:
For products outside the warranty period, repairs can be arranged. However, customers will need to cover theround-trip international shipping costs for sending the product to us and receiving it back after repair.
4. Damages or Loss During Shipping
-
For Customers Who Purchased Shipping Insurance:
If the product is damaged or lost during shipping, the insurance company will compensate for the loss. Customers must:- Submit a compensation claim within 15 calendar days of the order being shipped.
- Provide required documentation, such as photos of the damaged packaging, damaged product, or proof of non-delivery.
- Huatelecom will assist in the claim process to ensure timely resolution.
-
For Customers Without Shipping Insurance:
If you choose not to purchase shipping insurance, Huatelecom will not be liable for any damages or losses incurred during transit.
5. Application Process for Returns, Exchanges, or Claims
-
For further assistance, please reach out to us:
- Email: sales@huatelecom.com
- Phone: +852 44652638
- Business Hours: Monday to Friday, 9:00 AM - 6:00 PM (GMT+8)
Provide your order number, issue description, and supporting evidence (photos, videos, etc.).
-
Request Review:
Our team will review your application within 1-3 business days and notify you of the outcome. -
Return or Exchange Process:
- If approved, you will receive instructions on how to return the product or proceed with the exchange.
- For insurance claims, we will assist in coordinating with the insurance company.
-
Refund or Replacement:
Once the product is received and inspected, we will process your refund, exchange, or warranty claim promptly.
6. Important Notes
-
Timeframes:
- Returns must be initiated within 7 days of receipt.
- Exchanges must be requested within 15 days of receipt.
- Warranty replacements depend on the warranty terms for the specific product.
-
Condition of Returned Products:
Products must be returned in their original condition with all accessories and packaging intact. Damaged, altered, or incomplete items may not qualify for returns or exchanges. -
Shipping Insurance:
We highly recommend purchasing shipping insurance to protect against potential damages or losses during transit. -
Non-Eligible Returns/Exchanges:
- Products with intentional damage or misuse.
- Issues reported beyond the specified timeframes.
- Non-Huatelecom products or items purchased from unauthorized channels.
At Huatelecom, your satisfaction is our top priority. Thank you for trusting us with your business!