ETP48200-C2A1 Hardware Description
Introduction
ETP48200-C2A1 Datasheet
| Technical Specifications | |||
| Environmental requirements | Operating temperature | -40°C to +65°C | |
| Transportation temperature | -40°C to +70°C | ||
| Storage temperature | -40°C to +70°C | ||
| Operating humidity | 5%-95% RH | ||
| Storage humidity | 5%-95% RH | ||
| Altitude | 0-4000 m | ||
| When the altitude ranges from 2000 m to 4000 m, the operating temperature decreases by 1°C for each additional 200 m. | |||
| AC input | Input system | 220/380 V AC, three-phase, four-wire | |
| Input frequency | 45-66 Hz (rated frequency: 50 Hz or 60 Hz) | ||
| Power factor (PF) | ≥ 0.99 (rated input, with loads) | ||
| Total harmonic distortion (THD) | ≤ 10% (50% to 100% loads; Ta = 25°C; Vin = 208 V AC, 220 V AC, 230 V AC, 240 V AC) | ||
| DC output | Output voltage range | -42 V DC to -58 V DC | |
| Default output voltage | -53.5 V DC | ||
| Maximum output power | 12000 W | ||
| Regulated voltage precision | ≤ ±1% (The output voltage is within 53.5±0.1 V, with 50% load percentage.) | ||
| Peak-to-peak noise voltage | ≤ 200 mV (under rated input voltage and load power) | ||
| Noise weighting | ≤ 2 mV (300 Hz to 3400 Hz, input voltage ≤ 264 V AC) | ||
| Unbalance of load sharing | ≤ ±5% (with 50% to 100% loads) | ||
| AC input protection | AC input overvoltage protection threshold | > 300 V AC | |
| AC input overvoltage recovery threshold | 290-300 V AC | ||
| AC input undervoltage protection threshold | < 80 V AC | ||
| AC input undervoltage recovery threshold | 80-90 V AC | ||
| Structure | Power system (H x W x D) | 87.1 mm x 482 mm x 450 mm | |
| Weight | ≤ 15 kg (excluding rectifiers) | ||
| Protection level | IP20 | ||
| Installation mode | Equipped with mounting ears to adapt to 19-inch cabinets | ||
| Cable routing | Signal cables and communications cables are routed from the front, and power cables are routed from the rear. | ||
| Maintenance mode | Maintained from the front or rear | ||
| Heat dissipation | Natural cooling | ||
| Power Distribution Specifications | |||
| Input system | 220/380 V AC three-phase, four-wire | ||
| AC input | Four UT terminals | ||
| DC output | BLVD: one M8 OT terminal | ||
| LLVD: one M8 OT terminal | |||
| Battery route | Two 1-pole 100 A circuit beakers and two M6 OT terminals | ||
| Configurations | |||
| Subrack | 2 U power system | ||
| PDU | AC power distribution: AC input terminals | ||
| DC power distribution: battery low voltage disconnection (BLVD) route, load low voltage disconnection (LLVD) route, and battery route | |||
| SMU | SMU02B | ||
| User interface module (UIM) | UIM02D | ||
| Rectifier | A maximum of four R4850N2s are configured in N+1 redundancy. | ||
Return and Exchange Policy
Thank you for choosing Huatelecom! We value your trust and strive to provide high-quality products and exceptional service. Below is our comprehensive return and exchange policy to ensure your rights are protected.
1. Return Policy
-
Eligibility for Returns (Quality Issues Only):
If the product has quality defects that affect its normal usage, you are eligible to apply for a return within 7 calendar days of receiving the product. The following conditions must be met:- The product must be unused, with all original packaging, accessories, and manuals intact.
- A valid proof of purchase (order number, invoice, etc.) must be provided.
- Clear evidence of the defect, such as photos or videos, must be submitted for verification.
-
Shipping Costs for Returns:
If the return is due to quality issues, Huatelecom will cover the international shipping costs for returning the product. -
Refund Processing:
Once the returned product is received and inspected, the refund will be processed within 7 business days. The refund will be issued through the original payment method, and processing times may vary depending on your payment provider.
2. Exchange Policy
-
Eligibility for Exchanges (Quality Issues Only):
You may request an exchange if the product develops a quality issue within 15 calendar days of receipt. The conditions for eligibility are:- The product must be returned with all original packaging, accessories, and manuals.
- Proof of purchase and evidence of the defect must be provided.
-
Shipping Costs for Exchanges:
Huatelecom will bear the international shipping costs for the exchange. -
Exchange Process:
Upon receiving the defective product, we will inspect it and send a replacement product within 7 business days.
3. Warranty Service
-
Coverage During the Warranty Period:
For products within the warranty period, if quality issues arise, we will provide a replacement free of charge with your next order. No additional shipping costs will be incurred for the replacement. -
Out-of-Warranty Repairs:
For products outside the warranty period, repairs can be arranged. However, customers will need to cover theround-trip international shipping costs for sending the product to us and receiving it back after repair.
4. Damages or Loss During Shipping
-
For Customers Who Purchased Shipping Insurance:
If the product is damaged or lost during shipping, the insurance company will compensate for the loss. Customers must:- Submit a compensation claim within 15 calendar days of the order being shipped.
- Provide required documentation, such as photos of the damaged packaging, damaged product, or proof of non-delivery.
- Huatelecom will assist in the claim process to ensure timely resolution.
-
For Customers Without Shipping Insurance:
If you choose not to purchase shipping insurance, Huatelecom will not be liable for any damages or losses incurred during transit.
5. Application Process for Returns, Exchanges, or Claims
-
For further assistance, please reach out to us:
- Email: sales@huatelecom.com
- Phone: +852 44652638
- Business Hours: Monday to Friday, 9:00 AM - 6:00 PM (GMT+8)
Provide your order number, issue description, and supporting evidence (photos, videos, etc.).
-
Request Review:
Our team will review your application within 1-3 business days and notify you of the outcome. -
Return or Exchange Process:
- If approved, you will receive instructions on how to return the product or proceed with the exchange.
- For insurance claims, we will assist in coordinating with the insurance company.
-
Refund or Replacement:
Once the product is received and inspected, we will process your refund, exchange, or warranty claim promptly.
6. Important Notes
-
Timeframes:
- Returns must be initiated within 7 days of receipt.
- Exchanges must be requested within 15 days of receipt.
- Warranty replacements depend on the warranty terms for the specific product.
-
Condition of Returned Products:
Products must be returned in their original condition with all accessories and packaging intact. Damaged, altered, or incomplete items may not qualify for returns or exchanges. -
Shipping Insurance:
We highly recommend purchasing shipping insurance to protect against potential damages or losses during transit. -
Non-Eligible Returns/Exchanges:
- Products with intentional damage or misuse.
- Issues reported beyond the specified timeframes.
- Non-Huatelecom products or items purchased from unauthorized channels.
At Huatelecom, your satisfaction is our top priority. Thank you for trusting us with your business!